Shutting off the water is the advice everyone gives, and for a lot of homes it is right. It is also the piece of departure advice most likely to cause a problem when applied without checking what the valve actually controls.
This is what to work out before you turn anything.
Know what the main shutoff actually controls
In many homes the main is not a clean boundary. Irrigation, pool autofill, water treatment equipment, fire sprinklers and other systems may be connected in ways the owner does not expect, and the consequences of cutting one off are not always obvious at the valve.
Before changing anything, understand the plumbing layout. Where the configuration is unclear, that is a question for a licensed plumber rather than a guess, and it is a cheap question compared with the alternative.
Think about appliances and fixtures
Ice makers, dishwashers, washing machines, water heaters, reverse-osmosis systems and exterior hose connections each have their own valves and operating requirements.
A long absence is a good moment to inspect flexible supply lines, which are a common failure point and cheap to replace, and to decide deliberately which appliances should stay connected rather than leaving it to chance.
Do not interfere with life-safety systems
If the property has a residential fire-sprinkler system, or any other system that depends on water supply to function, do not close a valve without understanding the design and what it requires.
This is not a cautious footnote. Disabling a fire-protection system to prevent a leak trades a manageable risk for a much worse one. Ask the appropriate licensed professional.
If water stays on, leak detection becomes more important
Leaving the water on is a legitimate choice, particularly where shutting it off would compromise other systems. It raises the value of monitoring considerably.
Smart leak sensors and automatic shutoff devices add useful coverage, but test them before you leave rather than assuming. And make sure the alert reaches someone who can physically get into the house, because an alert received in another state does not stop water.
Write down the return procedure
If the water is shut off, decide in advance who restores it, how slowly it should be reopened if your plumber advises that, which fixtures should be checked afterward, and whether a vendor needs to be present.
Turning a main back on quickly after months can cause its own problems. The return plan is part of the departure plan, and it is much easier to write while you are standing in the house.
Pair plumbing decisions with regular observation
Even with the main off, roofs, condensate lines, irrigation and storms can still create moisture problems inside a house. A dry home is not guaranteed because one valve was closed.
Mountain Vista can add plumbing-related observations, leak-sensor checks and vendor access to a customized home watch plan while you are away.
Property note: Plumbing and fire-protection systems vary. Use licensed professionals for system-specific advice, and follow insurer and HOA requirements.
Sources used for fact-checking
- https://mvhomewatch.com/services/
- https://www.nationalhomewatchassociation.org/
